Belt-drives Chain Drive Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für Motorräder Belt-drives Chain Drive herunter. Belt Drives Chain Drive User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 3
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
CHAIN DRIVE INSTALLATION
THIS DRIVE IS TO BE INSTALLED BY A QUALIFIED HD MECHANIC.
FAILURE TO FOLLOW THESE INSTRUCTIONS WILL VOID OUR WARRANTY AND LIABILITY FOR THIS
PRODUCT.
1. BDL’s drives are to be used with stock OEM parts. Use of aftermarket parts may require other modifications or
may cause starter and alignment problems. (Aftermarket starters may cause premature wear on our starter gear)
2. Fill out our BDL’s registration card.
3. A starter pinion gear is enclosed and is for use on all 1994-up models only. You must replace the stock pinion
gear with BDL’s pinion gear on all 1994 up models.
4. You must inspect the drive after the first 100 miles and every 2500 miles after for proper chain tension.
5. Disconnect battery, remove spark plugs and support bike so it will not fall.
6. Remove primary drive if you are replacing an
existing drive. (Refer to HD manual)
7. Inspect new drive and check for fit. Install both
sprockets and make sure motor and transmission
shafts are square with each other. Align sprockets
using a 5/16” drill rod or other sturdy straight edge to
check for proper alignment. Remove sprockets at this
time.
1
Seitenansicht 0
1 2 3

Inhaltsverzeichnis

Seite 1 - CHAIN DRIVE INSTALLATION

CHAIN DRIVE INSTALLATIONTHIS DRIVE IS TO BE INSTALLED BY A QUALIFIED HD MECHANIC.FAILURE TO FOLLOW THESE INSTRUCTIONS WILL VOID OUR WARRANTY AND LIABI

Seite 2

8. Install chain adjuster assembly if this is a new installation.9. Re-install front sprocket and rear clutch basket assembly with chain.10. Tighten e

Seite 3

13. Re-install clutch pack: Two .078” steels first then alternate clutch fiber and steel ending with a fiber. Our clutch pack is 8-.078” steels and 7

Kommentare zu diesen Handbüchern

Keine Kommentare